Foscam FI8918W Wireless/Wired Pan & Tilt IP Camera (Video Review)

Posted on October 4, 2011 by admin

When I built my house 4 years ago I wanted to have a surveillance camera installed at the entrance. Not for nefarious reasons, but because I just like technology and felt pressing my face up to a peep hole was so two thousand and late. The company I was forced to use wanted to charge me an exorbitant amount for the camera so instead I had them home run the requisite wiring so I could purchase and install a more affordable solution at a later date.

There was a lot going on after the construction of my home, and our corresponding move, that it took me at least a year before I revisited the whole external camera project. After doing some research I quickly learned that the clowns that put the wiring in ran a coaxial cable without a corresponding power line, rendering it useless. Over the years I have looked at a variety of solutions but didn’t want to spend $700-$1400 to get this project online.


Then, earlier this year I noticed Logitech had a system (the Logitech Alert 750e) that retailed for $340. It seemed interesting enough, the reviews were decent but the price was a bit high for my liking.


A little more digging and I found this little gem, the Foscam FI8918W Wireless IP Camera for a quarter of the price ($86.68) and comparable reviews.

Now, it’s not like me to go with a non-recognizable brand like Foscam. Don’t get me wrong, I am not a “name brand” guy, but I do like to purchase from a company that I have some familiarity with for support and warranty issues, but the features and price of this $86 bad boy made it difficult for me to say no. So I didn’t.

Last week I received the camera and promptly installed it.

What I Like About It

The Price
At $86.68 this thing is super cheap.

It’s Wireless
Although it also has an Ethernet port for physical connectivity, being wireless means that it can connect to your 802.11b/g network even when an Ethernet jack is not close by.

It’s an IP Camera
This is one of its greatest features and means that it connects directly to your network (translation: you don’t need to connect it to a running computer to have it work.)

Unlike my printer which is physically connected to my wife’s computer. When I need to print something I need to make sure her computer is on. :(

Pan/Tilt support
Allows you to change the orientation of the camera 300 degrees horizontally, and 120 degrees vertically.

The more expensive Logitech camera is a fixed mount.

Night Vision
Allows you to see in complete darkness (up to 26 feet)

Two-Way Audio
The embedded microphone and speaker enable you to remotely talk and listen to people by the camera from wherever you are on the planet which is crazy cool.

Motion Detection
Which can be used to trigger the alarm function that snaps a series of 6 pictures and then emails them off to your gmail account (or other email address). I use it to get notifications when packages are delivered to my front door which is pretty neat.

Web Browser Monitoring and Control
Since this is an IP Camera it has to be self-sufficient, meaning it can’t rely on software running on a separate computer to function. That’s a good thing!

Since the device itself does not have a keyboard or display, setup, control, and monitoring are controlled via web browser. Just simply launch a browser on your computer (or iPad, or smart phone) and type in the camera’s IP address (Hence the name IP Camera) to interact with it.

Dynamic IP Address Support
Allows you to access your feed outside your home network even if your IP address changes.

Real-time Monitoring


The above picture is a snapshot of the browser interface of the Foscam FI8918W Wireless IP Camera. The feed displayed is from my freshly mounted camera. If you click on the picture you will be able to see the actual size of the control panel.

The little blue sphere in the top left allows you to pan and tilt the camera (which happens in real-time). You can adjust the camera’s resolution, turn on/off the Infrared camera, adjust brightness and contrast, and enable auto pan and tilt mode which keeps the cameras eye roving around.


This is another picture taken at night to demonstrate the night-vision capabilities. There is a street light off in the distance which is casting light toward the top of the image so what you are seeing is a bit of a hybrid night-vision shot.

Mobile Phone Support



Since the controls are browser-based you can access them from any web browser. I found a nifty application called IP Cam Viewer which is a bit easier to manage on my phones diminutive screen and allows me to not only see and control my camera from anywhere, but also listen and talk through it, even if I am in another country or state. Above is the feed viewed from my Droid X using IP Cam Viewer.

The program is free, but I loved it so much I splurged and paid the $4.99 to remove the ads and support the developer. This cool little app is also available for iPhone and Blackberry and is a worthwhile download even if you don’t have a camera as it allows you to see feeds from a list of beach and traffic cameras.

Video Demo


This short video I created gives you an idea of what the video stream looks like through the browser interface. I also geek-out a bit and show you how I am able to control and interact with the camera through my phone. Nerd alert!

Note: I intentionally recorded the web browser interface at its original size so you could see the actual size and shape of the view port provided by the browser interface. As a result it only takes up a small portion of the youtube video screen (hence the abundance of grey surrounding the image). To really get a feel for the camera’s image quality the video is best viewed at full screen and at 720p.

Device Settings


Setup and configuration of the Foscam FI8918W is contained in the Device Settings tab. Here you can adjust all elements of the camera. The user interface is similar to what you see when you setup a router or DSL modem. So if you have experience setting one of those up, you will be right at home here.

External Video Stream Access
Getting the camera to work outside your network requires that you to do a little port forwarding magic, and if your IP address is dynamic (that is, a new one is assigned to you every time your DSL modem is reset) then you will also have to configure the DDNS (Dynamic Domain Name Server). Thankfully the FI8918W supports this and Foscam provides step-by-step instructions for setting it up using the free service provided by

Email Alerts
To take advantage of the motion sensing and alert capabilities you will have to enter your outgoing email credentials into the device and if you want pictures sent you will have to have access to an FTP server. If you have a blog hosted on a provider like Host Gator you will already have access to this so it will be just a matter of entering in the appropriate ftp server address and login credentials to get this working.

Once properly configured you will receive an email with a series of six pictures anytime motion is detected. You can adjust the sensitivity as well as the time (in seconds) between snapshots.

Collecting all the right information and entering it into the requisite fields can be tedious but once you have it properly configured the results are certainly gratifying. Maybe I’m a geek, but I find it super cool to be able to check my porch for packages, or receive an email snapshot of the person ringing my door bell when I am out and about.

Best of all, there are no monthly fees associated with this camera’s use, nor does it require a running computer to work. Once setup, plug it into a power source within your network’s range and rock and roll!

Anyway, that was my latest personal project. I realize it’s a bit off-topic but computers and electronics are a big part of my life. I was really excited about this purchase and thought it would be cool to share. Thanks for indulging me. Now tell me what you’ve been up to.

Update 8/2/2011:

A lot of people have asked how they could embed the live video feed from their Foscam camera into their blog or website. The good news is that it’s not too complicated.

To make it even easier (and eliminate human error), I slapped together a little script that will automatically generate the code you need for your camera feed. Check out the post entitled How to Embed Video from Your Foscam FI8918W Wireless Camera Into Your Web Page.

I have placed this in my new blog where I will focus on technology and other geeky endeavors.

Update 8/12/2011:

Foscam used to have two really important documents on their site that don’t appear to come with the camera (unless I missed it on the installation disk). In any event, I found the FI8918W Quick Installation Guide and FI8918W User Manual before they were removed. I have uploaded them to my site as they are extremely detailed and a great reference.